Aluminium Limitless Tube Mech Hot Button Issue

My set up is:

As mentioned Aluminium Limitless Tube Mech

We out here doe <a href="” rel=”nofollow” target=”_blank”>rda

With wrathful wires Ni80 competition wire reading at 0.07 ohms

And standard Samsung 25r batteries (not in best condition)

Ever since I got these <a href="” rel=”nofollow” target=”_blank”>coils put on the mech has been getting extremely hot (which I thought is normal and expected seeing as they are built very low).
Took it to a local <a href="”>vape <a href="” rel=”nofollow” target=”_blank”>shop the other day and the guy in the shop said it's getting hot button (could be wrong, he's only 18 and comes…

<a href="”>Aluminium Limitless Tube Mech Hot Button Issue

upgraded myself

So hey there, Been awhile since i've been on here.I came from using the <a href="” rel=”nofollow” target=”_blank”>kanger <a href="” rel=”nofollow” target=”_blank”>topbox mini setup and the <a href="” rel=”nofollow” target=”_blank”>rba,then I dropped my <a href="” rel=”nofollow” target=”_blank”>mod and the <a href="” rel=”nofollow” target=”_blank”>tank broke.So after that I went to the <a href="” rel=”nofollow” target=”_blank”>aspire <a href="” rel=”nofollow” target=”_blank”>cleito 120 tank and the coils really sucked the $$$ out of me burnt hits all day defected coils, I had one pack of coils with no coils in two of them( no wire), store wouldn't even give me a refund on them,and you could tell they weren't messed with either.

So finally i said i'm done with <a href="” rel=”nofollow” target=”_blank”>tanks and store

<a href="”>upgraded myself

I’m not a robot

Howdy folks. Two month noob here. I have a KangerTeck <a href="” rel=”nofollow” target=”_blank”>CUPTI. I haven't had a cigarette in two months. A friend of mine let me hit his <a href="”>vape and then I was spoiled and vowed to never have a bad tasting cigarette (and they're all gross tasting compared <a href="”>vape) in my mouth ever again. I still have much to learn, so I'll be lurking around for a little while.

Found use for flavors I don’t like that I bought

So I've realized that if you have flavors you don't like and feel bad throwing money away, just wait until you get a cold and stuffed up cause you're not gonna taste it anyway but still get your nicotine <img src="” class=”mceSmilieSprite mceSmilie13″ alt=”:)” title=”Smile :)” />

Im new here, please be gentle.. haha

hey everyone, im new to this forum. i have been <a href="” rel=”nofollow” target=”_blank”>vaping for about 3 years now, using a 510 setup. but i think im after something a bit better than my current setup. my choice in australia is quite limited, but when holidaying in the US i found another option, but again, i think its a bit on the cheap side.
i think i want something that still looks and feels like the 510 setup, but i would like something to give me some more grunt than what i currently have. And i have noticed that after a…

<a href="”>Im new here, please be gentle.. haha

Looking to upgrade to a box mod

Hello! New to the forums, and looking for some buying advice on my next upgrade!

So currently I'm using a <a href="<a href="”>vape/” rel=”nofollow” target=”_blank”>provari 2.5 I believe (Honestly can't remember if it's the original or the 2.5, it's the limited zombie addition if that helps!) with an <a href="” rel=”nofollow” target=”_blank”>aspire mini <a href="” rel=”nofollow” target=”_blank”>nautilus <a href="” rel=”nofollow” target=”_blank”>tank. When I first started vaping (about 2ish years ago) I was using a hand-me-down machnial <a href="” rel=”nofollow” target=”_blank”>mod and an <a href="” rel=”nofollow” target=”_blank”>RDA a friend gave me to help cut down on my heavy gain smoking (no idea what the make or model of either of these where) but I…

<a href="”>Looking to upgrade to a box mod

2016 Vaper – cCoil: Black Gunk, Prevention & Cleaning?

Greetings all
Been vaping since the beginning of the year…
Got myself a
75W <a href="” rel=”nofollow” target=”_blank”>vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil a month or so back
Loving the look and feel and flavour…
I notice the cCoil gets a black gunk build up and a metallic flavour as well as being difficult to draw from, and have had to replace them more often that expected.
My ratio varies but mostly tend toward 70/30 VG/PG and 12mg nicotine
Any advice?
Like what is the best way to clean them if…

<a href="<a href="”>vaper-ccoil-black-gunk-prevention-cleaning.777171/”>2016 <a href="”>vaper – cCoil: Black Gunk, Prevention & Cleaning?

A New Vaper Among You

Hi there mates! Just recently decided to switch to e-cigs and ordered a <a href="” rel=”nofollow” target=”_blank”>Smok X Cube Ultra along with a TFV8 Cloud Beast. I am also going to order <a href="” rel=”nofollow” target=”_blank”>e-liquids probably from <a href="”>vapeWild, since they had a good rep on a couple websites. Planning on hurting my wallet for a bit after these and trying a <a href="” rel=”nofollow” target=”_blank”>Five Pawns or Black Note.

Even though I am a long time smoker I can easily restrain myself since I used to excessively smoke when I wrote something down (I am a translator so lots of paperwork for me)…

<a href="<a href="”>vaper-among-you.776889/”>A New <a href="”>vaper Among You

Need help with Kanger Topbox Mini

I bought the starter kit for the <a href="” rel=”nofollow” target=”_blank”>Kanger <a href="” rel=”nofollow” target=”_blank”>Topbox Mini a few months ago and it's been alright so far with a few minor problems. But the past few days, the only setting that works is Wattage, even though they are nickel <a href="” rel=”nofollow” target=”_blank”>coils. I've tried different temps and nothing works. I have used the SSOCC NI200 coils previously and also the OCC NI200 square coils recently. They've both worked well except for the past few days. I went to a <a href="” rel=”nofollow” target=”_blank”>shop and got one coil to see if the coils I had were the problem as…

<a href="”>Need help with Kanger Topbox Mini

Woohoo! I did it! I made my first coil!!!!


My Kanthal 26 gauge arrived today (along with the extra cotton I ordered) and I couldn't wait to try to build my very first coil! Just a simple 5 turns on the screwdriver shaft….checked the ohms….a very sweet 0.6….wicked, primed, fired it up on my <a href="” rel=”nofollow” target=”_blank”>Subox Mini

Ooops…forgot to put the cap on the deck…. <img src="” class=”mceSmilie” alt=”:shock:” title=”Shock :shock:” />

Blew the excess <a href="” rel=”nofollow” target=”_blank”><a href="”>juice out, put the cap on and I'm happily <a href="” rel=”nofollow” target=”_blank”>vaping away with 99' 6" of Kanthal left! (And 100' of 28 gauge Kanthal coming soon).

I am…

<a href="”>Woohoo! I did it! I made my first coil!!!!